Update on Mar 9th, 2017 :
https://geekhack.org/index.php?topic=86395.msg2420092#msg2420092https://www.facebook.com/douystudio/posts/800850810074355
Update 2017 Mar 1st :Hi,
Every body, it's a vacation in Taiwan from Feb 25~28.
So we update later.
After few sampling.
5 side dye-sub still has some issues.
Because of the height of the cap, the color is not very even on the side of caps.
So we'll change printing manufacturer but use origin tech to print it.
We fixed the spelling issue, and I make a new file of the design.
Origin file from designer has some small align issue and hard to fix.
So I just make a new one.
There's still 5% fail rate, to solve this, our partner will personally go to factory check and pick them.
We'll pick in our studio again after printing finish.
Update 2017 Jan 16th :Photo update :
https://geekhack.org/index.php?topic=86395.msg2340051#msg2340051As the photo shows.
Some of the keys are not well printed (off center).
And we get another sample with other color from another manufacturer.
Quality is pretty nice, and it is 5 side dye-sub, better touch feeling.
And there's a major advantage - their model have more extras.
So, instead of pick failed caps by human, we might consider change manufacturer.
The designing is the same without any change.
But new sample has to wait till Chinese New Year ends.
We should get it with about Feb 20th.
Than we can start production after confirm.
We have some buffer on timeline at the beginning.
So every thing is still under control and no need for delay on delivery.
We will wait for the sample and make final decision on choosing manufacturer.
Worst case is don't change manufacturer, and pick failed keys manually.
But we hope we can produce better production in the end.
Update 2017 Jan 9th :Hi,
Really sorry to tell you that the sample got delay.
We're solving this issue with carrier now.
Will update ASAP after we get it.
And this GB will extends for few days
Hi, we are Doyu Studio.
Top seller on eBay
http://stores.ebay.com/doyustudiohttp://shopkey.doyustudio.com/https://www.facebook.com/douystudio/posts/721293188030118We've ran several GBs this year
https://geekhack.org/index.php?topic=85761.0https://geekhack.org/index.php?topic=79182.0GB link for keycap with origin box(Higher shipping fee) :
http://shopkey.doyustudio.com/021cape01grs-b.htmlGB link for keycap with zip bag(Lower shipping fee) :
http://shopkey.doyustudio.com/021cape01grs.htmlGB link for Extra :
http://shopkey.doyustudio.com/021cape01gre1.htmlThis GB is about a Elvish alpha keycap
Material : PBT
Profile : SA 223333(Based on Filco's)
Printing : top printed
This keycap set contain several tech of printing.
1. White caps are using dye-sub printing.
2. Green(Both light and deep) are dip-dye with white PBT caps
3. White legends on green caps are made by cutting from surface with laser, and origin plastic color shows up.
These techs make sure this cap has a nice quality and lifetime.
View more images : http://imgur.com/a/Ta0R0This keycap set has ANSI 104 keys and some extra
Alpha set, modify set aren't get enough interesting in the IC, so we won't have it this time.
GB timeline :
Start from : 2016/12/14 00:00 (UTC+8)
Ends on : 2017/1/10 23:59 (UTC+8)
Estimate Shipping : Mid Mar to Late Mar, 2017
(2 months from GB End, We hope we can finish it within 1 month after GB ends,
But it's a little rush and Chinese New Year is from Jan/25~Feb/3, afraid we can't do it within 1 month,
So we promise a timeline which is easier to finish.)
If you have any questions/issues.
Please contact
[email protected]
