eucrite65 keyboard case

eucrite65 is a layered acrylic sheet-style keyboard case for any solderable 65% PCBs on the market. The unique aspects of the case are the dual brass weights on the bottom and the "integrated" FR4 plate.
"Integrated" because it's one of the many layers that make up the whole case. On the other hand the switch plate itself is connected with leaf springs to the outer frame, which provide you some flexibility and isolation by default. However you can breake off almost all of these spring-like arms (except the 4 outer most ones) to increases the flex.
And on the top of that the switch plate has two-sided graphics which can be seen through the slightly opaque acrylic sheets.

Additional picture of the prototype: https://imgur.com/a/sg30Ah6

The plate has 5 spring arms, which can be broken out as they have mouse bites where they are connected to the switchplate and the plate's frame. In this way, you will be able to adjust the flex of your keyboard. The plate has a small amount of flex, when all the arms are attached. Remove the 3 arms in the middle (highlighted in light blue colour on the image above) for slightly more flexibility. If you would like to experience the full f l e x, break away the other 4 arms (highlighted in blue).
To demonstrate how it looks like, I made a video:

Gallery of plate prototypes: https://imgur.com/a/NI5vN8p

Layout options