Welcome!I recently ran a GB for the Omnikey PCB I designed and after a few modifications to fix compatibility with older variants of the omnikey, I am back with round 2.
Along with the Omnikey board I will have the AT101/AT101W/SGI board and a Zenith Z-150 board for sale as well. Details below
PCB Renders:- Omnikey PCB
- AT101 PCB
- Z-150 PCB
Sorry for the bad renders, I don't have any better way to render PCBs at the moment.
Product Info:The boards will be matte black with ENIG(Gold) pads, with silkscreen in white. Omnikey has a logo, AT101 may have a small logo, Z-150 may have a small logo, will be determined before manu order.
- The Omnikey board Supports:
- Ultra
- Ultra T
- 101
- 102
- Plus
- As well as all other derivatives/variants
-The AT101 PCB supports:
-The Z-150 supports just itself as I don't know of any other board that would work at the current time.
What is Needed:
- Teensy++ for the Omnikey and Z-150
- Teensy2.0 for the AT101(must solder all pins to the PCB as there are a few extra pins that were used for the matrix in order to fit a smaller mc)
- Indicator LEDs
- Resistors for LEDs
- Switches
- Diodes, if not bought along with PCB
Omnikey Layouts:Supported layouts include all original layouts for the omnikeys, and include the option for ANSI or ISO support for enter and shift keys. As well there is the option for the below layouts, matching colors can be swapped and red keys will have to be given up to do so.
You can cut of the extra function columns on the left hand side, using either a razor saw and cutting down the middle of the plated holes where the silkscreen line is. Or you can score down that line, on both sides, with a sharp blade and snap it off to support boards without the extra function keys.
AT101 Layouts:Supported layouts include all original layouts for the AT101s, and include the option for ISO support for enter and shift keys. As well there is the option for the below layouts, matching colors can be swapped and red keys will have to be given up to do so. Options include both style stepped caps lock, 1.5U and 1.25U, to allow support of Tai-Hao alps cap sets and cherry style sets.
Z-150 Layouts:Supported layouts include the original layout, along with an AT/XT and TKL hybrid layout.
Pricing:Note: Prices do not include final shipping or Paypal fees.
PCBs:
- Omnikey:
- 10 - $66
- 15 - $53
- 20 - $46
- 30 - $36
- 40+ - $33
- AT101:
- 10 - $65
- 15 - $51
- 20 - $45
- 30 - $35
- 40+ - $31
- Z-150:
- 5 - $85
- 10 - $56
- 15 - $43
- 20 - $39
- 30 - $30
- 40+ - $27
Diodes:
Tai-Hao Spacebar stab adapters:
- 1 set - $5(estimate as quantity lowers price)
Shipping:
- US - $15
- International - $15 to $20
Schedule:This GB will open on 7/2 at 5pm central time and close on
7/23 at midnight central time.
Invoices will be sent out once I receive your order and are due on receipt. Once the GB closes I will refund the extra amount paid for any price drops hit. Failure to pay by
7/27 at midnight central time, will black list you from future GBs. I don't want to have the same issues I had with the Nexus slider GB, so this is how it will be done.
Production will take 2-3 weeks to arrive at my door. From there I will ship them out within 1 to 2 weeks depending on how many PCBs are ordered.
Order Link:Link:
https://goo.gl/forms/Ayiuc56LBBcvK2sS2Note: If you were part of the first round and you experienced issues with fitment, please PM me prior to placing your order to confirm a discount on your order of a round 2 omnikey PCB.
Note: If you wish to order a Round 1 omnikey PCB that is guaranteed to fit the Ultra T, 101 with the badge door, and Avant variants. I have a few available for sale for $34 each. Pm if interested.
Live Order Count:Omnikey - 0
AT101 - 7
Z-150 - 8
Inserts - 12
Diode sets - 11
