The buying period is now over. Thanks to all who participatedGreetings,
After much hard work I am finally able to offer you guys Aluminium Row 3 SA keycaps. It was extremely difficult to get at this price so I hope you enjoy.
The groupbuy will be run over here: http://www.gb.mech.market/?product=aluminium-keycap-group-buy I am currently based in Australia so shipping costs are based off that. It's a $13 flat rate World wide + $0.35 per 7g. This means if you order 50 caps shipping will be $30.50 ( 13+(0.35*50)=shipping ) if you live in Australia, however, $10 flat rate is offered.
The MoQ is 100 caps. It is currently 259/100The timeframe for shipping will be definitely before Christmas. The Order will be placed as soon as the GB is over. It will then take 2-4 weeks for manufacturing. Once manufacturing is complete I will receive the caps. Package them and send them off to you guys.
- It is $4.99USD per cap. This is a great improvement over what usually would cost $20.
- The caps are low tolerance milled, meaning that each and every cap should be very similar.
- The caps are lightly sandblasted
- The caps are also anodised (clear) to protect from wear.
- 1u size
- 7g in weight each
- Row 3 SA Profile
- Caps are blanks
A Video of the prototype caps can be found here
I hope you enjoy them and feel free to ask away.
A message from KingRamaDesigned by RAMA –
www.rama.works.
NOTE: This is not a release of an official RAMA cap, but a collaborative effort between ZISB(Invyr) and RAMA to bring to the community low cost SA profile key caps. This is separate from the work that RAMA produces out of RAMA WORKS and will differ in its presentation and packaging.
also for the warning/note:
Unfortunately, not all Cherry MX Stems are made equal. The stem cross for each switch type vary heavily. You will find that the precisely dimensioned RAMA SA 3 (WHITELABEL) will fit perfectly on some switches, and very loosely on others.
In the event of a loose fitting cap, place a piece of tape across the stem and push onto the switch. This will act as a shim to fill the gap between the cross and the stem.
