Viktus Sinne : O-ring/Burger mount Polycarb 60% - In QC - KeyAtlas
Group BuyKeyboards
Viktus Sinne : O-ring/Burger mount Polycarb 60% - In QC
geekhackauto-imported
0 followers0 bookmarks0 comments
Description
Viktus Sinne by Viktus Design
Specifications: • O-Ring/Burger Top Mount (3 mounts top, 3 mounts bottom) • HHKB, WKL or WK Layout • Polycarbonate case • 7 degree board angle • Type-C PCB support only (more info below) • ~1.7 Kg w/brass plate • Designed in collaboration with OneCreativeMind.
Where to buy: • The GB will go live on Viktus.Design • I am accepting US and international orders.
Dates: • November 1st, 2021 @ Noon CDT to November 30th, 2021 @ Midnight CDT • Q2/Q3 2022 delivery (depending on order volume this might change)
Mounting:
• Above is showing the O-rings on top and bottom of the plate as designed but you can build the board with multiple different mounting methods if you wish. • If you want a squishier mount and are willing to redrill the plate mount holes to ~4mm, you can use drone controller soft mounts (silicone) and M3 set screws for alignment. (note this will drop the plate down a bit lower than normal)
Viktus Sinne Info: • Color options: • Clear PC with sandblasted brass plate, weight, logo • Smoked PC with sandblasted brass plate, weight, logo • Atomic Purple PC with sandblasted brass plate, weight, logo • Teal PC with sandblasted brass plate, weight, logo (not prototyped yet, reference image on the product page)
• Pricing: • Board: - Dyed: $365 - Clear: $360 • PCB not included. • Extra Tops: $110 each (all layouts and colors. Colors may vary from your full board due to batch variance and the dye process)
Build Streams: • TopClack did a build stream here. • TaehaTypes did a build stream here.
Special Thanks:
• OneCreativeMind for the original concept and name along with all of the feedback and support. • Nox for helping fund the prototypes • Quakemz for helping with the first build stream and being an all around awesome person to talk with. • NinjaPirate for the unbelievably amazing pictures of my prototype. • TaehaTypes for the second build stream of my prototype.
FAQ: • Is a PCB included? I will not be including a PCB with the board. It has been confirmed to work with the AN-C (v1 and v2), Plain60, h60, DZ60, and WT60-D. Basically if it has a type-c connector it should work but I can't test every single option.
• Can you release the files so I can 3D print it? No.
• Will there be an aluminum version? At the moment there isn't plans for it but maybe later down the road.
Updates: To follow the project you can keep up with this thread, my website www.Viktus.Design or via the Viktus Design discord server where I will be most active.